LED feedback
The table below lists the LED behavior in specific situations:
Description | LED 1 (USB) | LED 2 (Scanner) | LED 3 (Cloud) |
|---|---|---|---|
Gateway boots up (about 1 minute) | All LEDs alternating blue/green from bottom to top until start | ||
Gateway connected to target device via USB | Constantly green | ||
Gateway connected to no scanners | Off | ||
Gateway connected to one or more scanners via BLE | Constantly green | ||
Gateway connected to the maximum number of allowed scanners | Constantly yellow | ||
Gateway cannot connect to another scanner but a scanner tries to connect | Red flashes 3 times | ||
Gateway receives data from scanner | Blue flashes | ||
Gateway sends data to host system | Blue flashes | ||
Gateway USB Mass Storage activated/deactivated | All LEDs flash blue 3 times | ||
All files on Gateway Mass Storage processed successfully | All LEDs flash green 3 times | ||
Failure in processing files on Gateway Mass Storage | All LEDs flash red 3 times | ||
Gateway firmware update in progress | All LEDs alternating purple/yellow from bottom to top until start | ||
Gateway downloading assets for Remote Updates | Purple flashes 3 times | ||
Scanner firmware update started | Purple flashes 3 times |
| |
Gateway searching for network | Yellow flashes constantly | ||
Gateway connected to network and searching for INSIGHT webportal | Constantly yellow | ||
Gateway connected to INSIGHT | Constantly green | ||
Gateway receives data from scanner or sends data to INSIGHT | Blue flashes |
