ProGlove Documentation

Apply the configuration
  1. On Insight Webportal, under Device Visibility, select Configurations.

  2. In the Configurations list, select the desired configuration.

  3. At the top right, select the download button.

    DownloadConfig.png

    The ProGlove.proconfig file downloads to your device.

  4. Copy the ProGlove.proconfig file to the following location on your Android device: /sdcard/Android/data/de.proglove.connect/files/ProGlove.proconfig

    The configuration is automatically applied by Insight Mobile, even if the app is already running.

Important

Make sure your configuration file has the exact name ProGlove.proconfig.

Copying to this location usually does not require any additional storage permissions from the MDM system.

Apply configuration files via barcode
  1. On Insight Webportal, under Device Visibility, select Configurations.

  2. At the top right, click the AddIcon.png icon to add a configuration.

  3. Select Insight Mobile (Android).

  4. Create your configuration.

  5. At the bottom of the page, select Next.

  6. Type in the name of your configuration and select Next.

    The Configuration Barcode modal window displays the generated barcode.

  7. Pair a scanner with your Android device.

  8. Scan the Configuration barcode.

    ApplyConfigBarcode.png

    The configuration is applied to the scanner and the Insight Mobile Android app.

    Note

    In case you want to save the configuration barcode for later use, be aware that it expires after two hours. After that, you need to go back to your configuration and generate a new one.

  9. Select Save.

    Your configuration displays in the list of Saved Configuration Files.

Note

Applying a configuration file via barcode is permanent and automatically creates a ProGlove.proconfig on the device. The configuration remains active as if configured manually.

Important

Only configurations with approximately up to 10 Workflow Rules can be applied using a Configuration barcode due to the size limitation of the configuration content.

Apply the existing configuration via barcode
  1. In the Configurations list, click the pencil icon next to your configuration.

    The Edit Configuration screen displays.

  2. At the bottom, click Next.

    The modal Apply Configuration window displays the configuration barcode.

  3. Click Save.

Note

If you click Back in the Apply Configuration window, modify the configuration, and click Next again the configuration barcode will change to include the changes you made.