Skip to main content

ProGlove Documentation

Connect Gateway

To connect a Gateway to your desktop:

  • Connect the Gateway’s USB cable to your desktop.

    The Gateway boots up in about 1 minute. The USB LED glows green constantly.

To connect your scanner to the Gateway:

  • Scan the QR code on the Gateway with your scanner.

    The scanner connects to the Gateway and the Scanner LED glows green.

Pairing barcode in Status folder

If your Gateway is not visually accessible in order to scan the pairing barcode, you can access the pairing barcode inside the Status Folder of your Gateway Mass storage device.


Use the barcode below to disconnect a scanner from its host: