ProGlove Documentation

Create a configuration file

  1. On Insight Webportal, under Device Visibility, select Configurations.

  2. At the top right, click AddIcon.png to add a configuration.

    CreateConfiguration01.png

  3. Select the device you want to connect to Insight Webportal and select Next.

    Config_3_0_select_GW.png

  4. Type in a unique name for your configuration and click Next.

    Config_3_0_name_your_configuration.png

  5. Select the Connectivity platform mode.

    Connectivity_platform_config_3_0.png

  6. Define your settings in the Gateway, Integration, Scanner, and Symbology tabs, or simply create your own Workflow Rules. You can also use the Zero-touch Firmware feature to update your scanners as soon as they are connected to the Gateway.Connectivity Settings

    Define_settings_config_3_0.png

  7. At the bottom of the left navigation pane, click Save configuration.

    Save_configuration_config_3_0.png

  8. The modal Apply Configuration window displays.

    Apply_configuration_using_barcode_config_3_0.png

  9. To apply the configuration to the connected device, scan the configuration barcode or apply it manually.

  10. Click Save.

    Your configuration displays in the Configurations list.

Note

If you want to transfer the ProGlove.proconfig file manually to your device or distribute it using an MDM solution, select your configuration and click the download button at the top right.

DownloadButtonNew.png

Note

In the Configurations list, you can edit the existing configurations by clicking the pencil icon and either save the changes to the configuration or use Save as copy to save it as a new configuration.

Important

  • The ProGlove.proconfig configuration file consists of one default profile and up to 6 custom profiles.

  • The ProGlove.proconfig configuration file is not compatible with the .pgconf file from AutoConfig.

  • The ProGlove.proconfig configuration identifies a profile with a unique profile name (ID).

In this section: