Skip to main content

ProGlove Documentation

Create a configuration file

  1. Log in to INSIGHT webportal and select Configurations → Device Configurations.

  2. Click the New Configuration button in the top-right corner of the list to add a configuration.

    NewDeviceConfiguration.png

  3. Select Gateway and click Next.

    NewDeviceConfig_SelectGW.png

  4. Type in the name for your configuration and click Next.

    NewDeviceConfig_GWFileName.png

  5. Change the defined name at any time by accessing the General configurations settings found right next to the configuration name in the upper-left corner of the screen. You can also apply QR restrictions to the configuration you are creating, and disable any future configurations or staging settings from being applied to your devices via QR codes.

    GWConfig_GeneralSettings.png

  6. Define your settings in the Gateway, Integration, Scanner, and Symbology tabs. You can also use the Zero-touch Update feature to update your scanners as soon as they are connected to the Gateway, as well as create your own Workflow rules.

    GWConfig_Settings.png

  7. At the bottom of the left navigation pane, click SAVE.

    GWConfig_SaveConfig.png

  8. To apply the configuration to the connected device, select Barcode Scan to apply it by simply scanning the configuration barcode, or select File Transfer to apply it manually.

    GWConfig_ApplySave.png

  9. Click Save.

    Your configuration displays in the Configurations list.

Note

If you want to transfer the ProGlove.proconfig file manually to your device or distribute it using an MDM solution, find your configuration on the list and select Apply Configuration from the menu. Then select File Transfer to download the configuration file.

In this section: