ProGlove Documentation

LED feedback

The table below lists the LED behavior in specific situations:

Description

LED 1 (USB)

LED 2 (Scanner)

LED 3 (Cloud)

Gateway boots up (about 1 minute)

All LEDs alternating blue/green from left to right until start LED1.png

Gateway connected to target device via USB

Constantly green LED2.png

Gateway connected to no scanners

Off

Gateway connected to one or more scanners via BLE

Constantly green LED2.png

Gateway connected to the maximum number of allowed scanners

Constantly red LED8.png

Gateway cannot connect to another scanner but a scanner tries to connect

Red flashes 3 times LED7.png

Gateway receives data from scanner

Blue flashes LED3.png

Gateway sends data to host system

Blue flashes LED3.png

Gateway USB Mass Storage activated/deactivated

All LEDs flash blue three times LED9.png

All files on Gateway Mass Storage processed successfully

All LEDs flash green three times LED10.png

Failure in processing files on Gateway Mass Storage

All LEDs flash red three times LED7.png

Gateway firmware update in progress

All LEDs alternating purple/yellow from left to right until start LED11.png

Scanner firmware update started

All LEDs flash purple three times LED12.png

Gateway searching for network

Yellow flashes constantly LED5.png

Gateway connected to network and searching for Insight Webportal

Constantly yellow LED5.png

Gateway connected to Insight Webportal

Constantly green LED2.png

Gateway receives data from scanner or sends data to Insight Webportal

Blue flashes LED3.png