ProGlove Documentation

Enable Gateway as a Mass Storage device

  1. Connect your Gateway to your desktop via USB cable.

    The Gateway boots up in about one minute and LED 1 (USB) glows green.

  2. Scan the Pairing Barcode on your Gateway with your scanner.

    Your scanner connects to the Gateway and the LED 2 (Scanner) glows green.

  3. Scan the barcode below to enable the Gateway as a Mass Storage Device.

    PEP_EnableMassStorage.png

    The Gateway displays as a Mass Storage Device on your desktop.

Note

To upload new files to the Gateway (e.g. to trigger an update or update the information in the Status folder) the Gateway has to be ejected from the host.

Note

The Mass Storage Mode can be set to Continuous on Insight Webportal. When you eject the Mass Storage device, it automatically displays as a Mass Storage device again.